Tips for using a pump with two-end support mainly include the following points:
Installation location selection: Ensure that the installation location of the pump is stable to avoid vibration and tilting that will affect the normal operation of the pump.
Operation manual reading: Before using a pump with two-end support, be sure to read the operation manual of the equipment carefully to understand the working principle and technical parameters of the pump.
Parameter confirmation: Ensure that the specifications of the pump match the hydraulic system to which it is connected to avoid failures due to parameter mismatch.
Outrigger form selection: Select a suitable outrigger form according to the length of the boom, such as X-type, XH-type, V-type, SX-type, etc., to ensure safety and save production costs.
Use of single-side support: When the construction site space is limited, single-side support methods such as front support, left support and right support can be used to meet different construction needs.
Fully extended outriggers: When working, the outriggers need to be fully extended to the extreme position to ensure their reliability. Angle limit: The working range angle of the front support arm is generally around 60°, while the working range angle of the left and right support arms is about 120°.
Safe operation: Be highly vigilant during operation and do not exceed the selected angle range to prevent dangers such as rollover.
The above techniques can effectively improve the efficiency and safety of the pumps supported at both ends.